Low Cost Boundary Scan for Entry-Level Users

SCANBOOSTER II

If you are looking for a compact yet powerful module to enter the world of Embedded JTAG Solutions, SCANBOOSTER II is the perfect choice. The latest generation of the JTAG/Boundary Scan controller offers almost unlimited possibilities to combine state-of-the-art embedded technologies: for testing, validation, debugging or programming.

The SCANBOOSTER II complements the existing range of SCANFLEX II solutions with a stand-alone product range in the low and medium power range and is used for JTAG/Boundary Scan test, (C)PLD/FPGA programming and conditionally for in-system programming of FLASH components such as NAND, NOR, SPI, I²C and eMMC.

PicoTAP ATE

The PicoTAP ATE is an ultra-compact JTAG/Boundary Scan controller for use in the laboratory and production. The small controller is a flexibly configurable compact unit that supports a variety of so-called embedded access technologies. Embedded instruments in hardware design are used to test and program complex boards with greatly reduced physical access. It is ideally suited for integration into various test systems.

 

  SCANBOOSTER II PicoTAP ATE
Power Supply 5,0 V via power supply unit 5,0 V via USB connector
Control Interface Gbit LAN and USB 2.0 USB 2.0
Maximum TCK Frequency 16 MHz 15 MHz (no continuous bursts)
Number of TAP Slots 2 1
TIC Modules    
Internally available TIC modules SFX II TIC01/LX
SFX II TIC01
SFX II TIC120/LX
SFX II TEM(/ISO)

Typ TIC020
(permanently mounted, test bus Vout: 1,2 V - 3,6 V and Vin: 0,0 V - 3,0 V (programmable))

Externally available TIC modules TIC02/S(R)
TIC03/ACP
TIC022/S(R)
TIC022-MUX/SR
TIC022-HVPGR/SR
TIC122/S(R)
 
SFX/LS Interface none none
Number of SFX I/O
Modules
on controller: 0
external: 0
on controller: 0
external: 0
Number of MPP I/O / MPP Groups 32 / 4 (each group has 8 pins and the Vio can be programmed from 0.9 V - 3.6 V) 0 / 0
MPP Connector Type 40-pin male connector with 2,54 mm pitch none
Additional resources for UUT or user depending on the TIC module, further resources may be available 4 AUX signals
Further Software Features ADYCS

Compatibility SCANFLEX II

Due to the optimized price/performance ratio, the modules can also be used in very cost-sensitive applications, with full support from the integrated JTAG/Boundary Scan software platform SYSTEM CASCON. Due to its compatibility with the more powerful SCANFLEX II platform, the test programs can be transferred directly.

► More on SYSTEM CASCON ► More on SCANFLEX II solutions

 

More about Low Cost Boundary Scan

Downloads

Events

抱歉暂无活动
×
您需要帮助吗?

请联系我们!

Steffen Kamprad - Sales Manager
先生 Steffen Kamprad