联系我们
Sensor Simulation
Series 4010
The Series 4010 was developed for the simulation of incremental encoders with 24 V signals, 5 V differential signals as well as absolute encoders with SSI interface. Additionally, an integrated frequency generator enables the test of counter inputs with a 24 V voltage range. The Modules are available in a PXI and USB version.
The PXI plug-in card can be utilised in a CompactPCI™- or in PXI™ system and the USB module can be utilised as plug-in card in a USB rack system.
Application
- general test and measurement systems
- end of Line Test
- automation engineering
- industrial electronics
Series 4011
The modules from series 4011 allow incremental encoder simulation for End-of-Line tests. The cards have four channels and three tracks per channel.
Furthermore, the user part is galvanically isolated from the PXI part (therefore not grounded). With a voltage range between 5 to 30 V and a frequency of up to 200 kHz, PXI 4011 supports the PXI trigger line and, additionally, has an external trigger input per channel.
The PXI plug-in card can be utilised in a CompactPCI™- or in PXI™ system and the USB module can be utilised as plug-in card in a USB rack system.
Series 4032
Analogue voltage and current input module with integrated current sink
- 10 independent, potential-free channels with different switchable reference potentials
- separate force/sense connections per channel
- input voltage range from 0V to +36V (1.23mV/LSB)
- max. input current level ±163 mA( µA/LSB)
- max. sampling rate 7 kS/s
- integrated adjustable average function per channel
- integrated power monitor per channel
- integrated 100 mA constant current sink per channel
- application part isolated from user interface (Earth ) Uiso < 1kV DC
