AOI module for mounting processes and THT assembly

THT assembly and many other mounting processes are still not fully automated due to economical reasons. As a result, such work is usually carried out manually by appropriately qualified employees. Compared to automated processes, however, the risk of faults in manual assembly, such as THT printed circuit boards, is much higher. Monotonous work in particular can easily lead to fatigue and the resulting careless mistakes.

The ideal solution for direct and immediate fault detection in such manual processes would be a high-resolution, automatic optical inspection system directly at the assembly station. At the same time, the system should be completely subordinate to the conditions of the assembly process.

The problems for the realization of such a system are obvious. High resolutions with large image areas are usually achieved by scanning or stop-and-go camera systems.

The open mounting environment results in changing lighting conditions. This poses an extreme challenge to the image processing algorithms, which must provide reliable inspection with reproducible results despite the unfavorable conditions.


MultiEyeS plus

With the MultiEyeS plus, GÖPEL electronic offers a smart automatic optical inspection module for integration into mounting and THT assembly stations. It fully meets these requirements through the consistent use of the latest technologies.

The system concept based on multi-camera image acquisition technology enables imaging with outstanding quality and detail resolution. Thanks to the AI functions used, the system is self-learning and works completely reliably even without light shielding. Real-time monitoring of mounting and placement processes directly at the assembly station is now a reality.

A wide range of applications

The MultiEyeS plus assists you with your tasks. Here is a selection of applications:

  • Assembly of components in casings
  • Assembly of plastic parts
  • Battery cell assembly
  • Manual assembly processes in the automotive sector
  • Incoming and outgoing goods inspection

Do you have further requirements from the MultiEyeS plus? Contact us:

Inspection Sales E-Mail Contact

The systems from the MultiEyeS Family

MultiEyeS inline

MultiEyeS inline CCI

The MultiEyeS Technology

  • inspection area: 550 mm x 450 mm
  • multiple cameras arranged in a matrix-like configuration
  • resolution of 240 megapixels
  • completely frictionless and maintenance-free
  • application-optimized stitching algorithm merges images together

Unmatched Test Speed

  • inspection speed of up tp 800 cm²/s
  • detection of the entire UUT by a single snap

Artificial Intellicence

  • self-learning system
  • sturdy classification even in open systems without light shielding
  • increased test reliability despite changing lighting conditions

Inspection scope

  • presence of components
  • correct positioning of components and connectors
  • polarity
  • OCR
  • position and defect detection
  • check for completeness


  • outstanding ease of use with the system software PILOT AOI
  • highest fault detection through different inspection methods as well as individually expandable inspection functions and library entries
  • maximum inspection reliability through verification of the inspection depth and monitoring of defect detection


Ines Fietze
女士 Ines Fietze




Frau Katharina Peters
女士 Katharina Peters

More about MultiEyeS plus






GÖPEL electronic GmbH
+49-3641-6896-0   电话