Sensor Simulation

Series 4010

The Series 4010 was developed for the simulation of incremental encoders with 24 V signals, 5 V differential signals as well as absolute encoders with SSI interface. Additionally, an integrated frequency generator enables the test of counter inputs with a 24 V voltage range. The Modules are available in a PXI and USB version.

The PXI plug-in card can be utilised in a CompactPCI™- or in PXI™ system and the USB module can be utilised as plug-in card in a USB rack system.

Application

  • general test and measurement systems
  • end of Line Test
  • automation engineering
  • industrial electronics
×
您需要帮助吗?

请联系我们!

Markus Urbansky
先生 Markus Urbansky

Series 4011

The modules from series 4011 allow incremental encoder simulation for End-of-Line tests. The cards have four channels and three tracks per channel.

Furthermore, the user part is galvanically isolated from the PXI part (therefore not grounded). With a voltage range between 5 to 30 V and a frequency of up to 200 kHz, PXI 4011 supports the PXI trigger line and, additionally, has an external trigger input per channel.

The PXI plug-in card can be utilised in a CompactPCI™- or in PXI™ system and the USB module can be utilised as plug-in card in a USB rack system. 

► More about the USB rack system

Application

  • general test and measurement systems
  • test of encoder interfaces
  • end of Line Test

Series 4032

Analogue voltage and current input module with integrated current sink

  • 10 independent, potential-free channels with different switchable reference potentials
  • separate force/sense connections per channel
  • input voltage range from 0V to +36V (1.23mV/LSB)
  • max. input current level ±163 mA( µA/LSB)
  • max. sampling rate 7 kS/s
  • integrated adjustable average function per channel
  • integrated power monitor per channel
  • integrated 100 mA constant current sink per channel
  • application part isolated from user interface (Earth ) Uiso < 1kV DC

PXI 4032

The PXI board 4032 can be operated in a CompactPCI™ or a PXI™ system and the USB variant as a plug in board in a USB-Rack-System. The module is also available as a stand-alone device with USB 2.0 or Gb-Ethernet connection

► More about the USB Rack System

More about Sensor Simulation

Downloads

Do you have any questions or do you wish an offer?

Please feel free to contact us. We are looking forward to your inquiries. 

 

×
您需要帮助吗?

请联系我们!

Markus Urbansky
先生 Markus Urbansky
×
您需要帮助吗?

请联系我们!

GÖPEL electronic GmbH
+49-3641-6896-0   电话