TIC expansion modules for the SCANFLEX II controller family

Maximum flexibility and versatile interface

GOEPEL electronic is expanding its portfolio of Test Access Port (TAP) Interface Cards (TIC) with two new modules. The plug-in variant SFX II TIC01/VX and the external add-on variant SFX II TIC422/S(R) will be on display for the first time at electronica 2024 in Munich. Both modules are designed for operation with SFX II CUBE, SFX II BLADE, and SCANBOOSTER II controllers and are compatible with  previous TIC variants.

Maximum flexibility for testing, embedded programming, and debugging

The SFX II TIC01/VX can be installed in any TIC slot of compatible controllers and thus offers a high degree of adaptability and flexibility for a wide variety of applications for boundary-scan testing (BST), processor-emulation testing (PET), embedded in-system programming, and debugging.

An outstanding feature of this new TIC is the programmable voltage range from 1.65V to 4.5V. The resulting 5V signal compatibility, combined with other features such as programmable impedance, programmable input (threshold) voltage, special protection functionality, and a switch control signal, it can be easily adapted to the respective device under test.

Versatile interface for debug protocols

SFX II TIC422/S(R) is another TIC module supporting a wide range of serial debug protocols such as JTAG, SWD, BDM, SBW, PIC, HS/CSI, and DAP. Thanks to its reconfigurable architecture, the range of protocols can be easily extended even for modules already installed in test fixtures. It is also the first external TIC from GOEPEL featuring programmable input and output voltage (1.65 V to 4.5 V).

SFX II TIC422/S(R) and modules like it act as the front-end interface for controlling the Unit Under Test (UUT) test access port and therefore is responsible for the reliable control of the connected buses, especially in 5V systems. This new TIC module is also fully compatible with TIC022/S(R).

Since support for all protocols is resident in hardware on the TIC module, there is no delay or additional cost in manufacturing when switching between many different UUT types and requirements - ideal for predictable, efficient production. 
Analogous to SFX II TIC 422/S(R) for the SCANFLEX controller family, a POD422/S(R) is available for use with the award-winning FlashFOX stand-alone programmer.

Both modules are supported on the software side by the embedded JTAG Solutions platform SYSTEM CASCON. Thanks to the platform’s VarioTAP technology, processors and microcontrollers can be transformed into powerful, embedded test and programming instruments without the need for design-specific firmware.

TIC extension modules for SCANFLEX II controller family
Created by Christina Schellbach | | Embedded JTAG Solutions

Newsletter subscription

Receive the free newsletter of GÖPEL electronic here. 
Invitations to exclusive events, free web seminars, as well as news about current test and inspection topics.

Newsletter subscription

 

×
您需要帮助吗?

请联系我们!

Picture of person Steffen Kamprad - Sales Manager
先生 Steffen Kamprad