29. Sep '22

Central verification with the PILOT Supervisor

The webinar will show how centralised verification of inspection data from different manufacturers works in electronics manufacturing. The resulting advantages, such as saving equipment and valuable space in the production line as well as better utilisation of personnel, will be highlighted.

Even if one no longer wants to do without inspection systems, there is a necessary evil associated with them: Due to the unavoidable pseudo defects, verification workstations are necessary for manual classification of the detected defects. Within production lines, this is typically done by inline workstations equipped with PC, monitors and software.

The webinar will show how, in contrast, central verification of inspection data from different manufacturers works. The resulting advantages, such as the saving of equipment and production space as well as better personnel utilisation, will be highlighted as well as how to deal with the disadvantage that the physical assembly is not available for inspection at the central verification station.


David Whetstone


Same topic, different time zone

Date: 30 September 2022,  4 am UTC

Register now


Date: 30 September 2022, 9 am UTC

Register now

» register now

  • • 29. Sep '22 14:00 - 15:00 UTC
Frank Amm

Frank Amm
+4936416896741  Phone
f.amm@goepel.com  Mail

Do you need help?

Contact us!

Claudia Mock - Eventmanagement
Mrs. Claudia Mock