The center of the JTAG/Boundary Scan system

SCANFLEX II Controller

SCANFLEX II systems are controlled through a JTAG/Boundary Scan Controller. This controller is responsible for simultaneous generation and dynamic distribution of serial patterns, parallel patterns, and control sequences, supporting three standard SFX II and SFX/LS Interfaces.

All SCANFLEX II Controllers are available in three performance classes (A/B/C).

The product portfolio is being constantly expanded. Customer specific products are offered upon request. 

  SFX II CUBE SFX II BLADE 4 SFX II BLADE 4/RMx1
SFX II BLADE 4/RMx2
SFX II BLADE 4/RMx3
SFX II BLADE 8/RMx1
SFX II BLADE 8/RMx2
Power Supply 5.0 V via power supply unit
Control Interface Gbit LAN and USB3.0
TCK Frequency

Performance Class A = 20 MHz and Scan Data Buffer (for medium performance requirements)

Performance Class B = 50 MHz and SPACE III (for high performance requirements)

Performance Class C = 100 MHz and SPACE III (for extrem high performance requirements)

Number of TAP Slots 8 4 4 8
TIC Modules
Internally available TIC modules

SFX II TIC01/LX
SFX II TIC01
SFX II TIC120/LX
SFX II TEM(/ISO)

Externally available TIC modules TIC02/S(R)
TIC03/ACP
TIC022/S(R)
TIC022-MUX/SR
TIC022-HVPGR/SR
TIC122/S(R)
SFX/LS Interface 2x RJ-45 Connector
Number of SFX I/O Modules

on controller: 1
externally via SFX CARRIER: 30

on controller: 0
externally via SFX CARRIER: 30

Number of MPP I/O / MPP Groups 64 / 8 (each group has 8 pins and Vio can be programmed from 0,9 V - 3,6 V)
MPP Connector Type 2x 40-pin male connector with 2.54 mm pitch
Additional resources for
UUT or user
USB2.0 Host for WLAN
USB2.0 RSV / GBit LAN / EXT (Connector: Micro HDMI)
depending on the TIC module, further resources may be available
Further Software Features HYSCAN | FASTSCALE |  SPACE III |  ADYCS
  SFX II PXIe C4/FXT-X SFX II PXIe C4/LX-X
Power Supply from PXI(e) Rack
Control Interface PXIe x2 Gen 2
TCK Frequency

Performance Class A = 20 MHz and Scan Data Buffer (for medium performance requirements)

Performance Class B = 50 MHz and SPACE III (for high performance requirements)

Performance Class C = 100 MHz and SPACE III (for extrem high performance requirements)

Number of TAP Slots 4
Internally available TIC modules   4 x SFX II TIC01/LX
(permanently mounted, Test bus Vout: 0,9 V - 3,6 V und Vin: 0,0 V - 3,0 V (programmable))
Externally available TIC modules

TIC02/S(R)
TIC03/ACP
TIC022/S(R)
TIC022-MUX/SR
TIC022-HVPGR/SR
TIC122/S(R)

 
SFX/LS Interface 1 x EXT (Micro HDMI)

Number of SFX I/O
Modules

on controller: 0
external: 0

Number of MPP I/O / MPP Groups 32 / 4 (each group has 8 pins and Vio can be programmed from 0,9 V - 3,6 V)
MPP Connector Type to 2 x 40-pin socket connector with 2.54 mm pitch via paddle card to 68-pin SCSI header via paddle card
Additional resources for UUT or user

EXT (Connector: Micro HDMI)

2 x AD/AD (10 bit, 0 - 4,095 V) on 40-pin socket connector with 2.54 mm pitch via paddle card

3 x I/O (3,3 V, max. 5,5 V Vin) on 40-pin socket connector with 2.54 mm pitch via paddle card

depending on the TIC module, further resources may be available

EXT (Connector: Micro HDMI)

2x AD/AD (10 bit, 0 - 4,095 V) on 20-pin male connector with 2.54 mm pitch via paddle card

3x I/O (3,3 V, max. 5,5 V Vin) on 40-pin male connector with 2.54 mm pitch via paddle card

Further Software Features HYSCAN | FASTSCALE |  SPACE III |  ADYCS

Low cost Controller

Testing, validation or even programming for beginners — the cost-efficient controller suits for standard applications with lower performance requirements.

► Find out more about the SCANBOOSTER II

 

×
Do you need help?

Contact us!

Steffen Kamprad - Sales Manager
Mr. Steffen Kamprad