GÖPEL electronic - Enjoy Testing! Measuring & testing technology

Give us a call: +49-3641-6896-0

Callback Service

Contact

Test Convention
Technology meets Quality: 24/25 April in Jena.
Register now ➜
https://www.testconvention.com/
Flashed!
Embedded ISP with FlashFOX. New production programmer.
Find out more →
FlashFOX® - compact POD unit for easy integration into ATE systems
Serie 62 & Net2Run
In-vehicle network simulation and test
Learn more now ➜
Automotive Test Software for Simulation

Represented in 37 countries

240 employees

40 MIO turnover

GÖPEL electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems.

[Translate to Englisch:] Test Convention 2024

03/19/2024 | Events

Test Convention 2024 – Technology meets Quality at this networking event in Jena

[Translate to Englisch:] Boundary Scan und Automotive Test Solutions

03/06/2024 | Embedded JTAG Solutions

Boundary Scan and Automotive Test Solutions at embedded world 2024

JTAG/Boundary Scan meets Automotive Test

03/05/2024 | Roadshow

JTAG/Boundary Scan meets Automotive Test at MOTORWORLD in Cologne and Munich

MultiEyeS plus with placement assistance

02/07/2024 | Inspection Solutions

MultiEyeS plus with augmented reality-based placement assistance

environmental management standard DIN EN ISO 14001:2015

12/01/2023 | Company

Environmental protection in the workplace - certified responsibility for more sustainability

National Sales Development Manager USA

11/27/2023 | Company

GOEPEL Electronics LLC strengthens its team with experienced sales expert

PicoTAP ATE

11/20/2023 | Embedded JTAG Solutions

Innovative JTAG integration for Seica Flying Prober

award of the productronica 2023 trade fair

11/15/2023 | Embedded JTAG Solutions

FlashFOX on the winners' podium at the productronica innovation award

MultiEyeS plus

11/01/2023 | Inspection Solutions

Innovative MultiEyeS plus for smart inspection and best assembly quality

14 to 17 November, booth A2.239

10/04/2023 | Embedded JTAG Solutions

Innovative strength meets diversity at productronica

EJS Roadshow at MOTORWORLD

08/23/2023 | Embedded JTAG Solutions

First-class test strategies set the tone in MOTORWORLD

Automotive Test Solutions Übersicht

08/01/2023 | Automotive Test Solutions

Shaping the future - part of the Automotive Thuringia Sector Report 2023

Trade fair demonstrator at Automotive Testing Expo Stuttgart 2023

07/06/2023 | Automotive Test Solutions

High demand for robotics setup confirms test automation trend

TISAX (Trusted Information Security Assessment Exchange)

06/27/2023 | Company

Flawlessly passing the TISAX® assessment

Successful certification in the JOSCAR supplier portal

06/23/2023 | Company

Successful certification in the JOSCAR supplier portal

Wide range of powerful, intelligent testing technologies at Automotive Testing Expo

05/15/2023 | Automotive Test Solutions

Powerful, intelligent testing technologies at Automotive Testing Expo

System solution for the 3D inspection of solder and sintering pastes

05/08/2023 | Inspection Solutions

New 3D solder paste inspection system with advanced technology

8th ETFN Electronics Technology Forum North in Hamburg

04/27/2023 | Embedded JTAG Solutions

Hands-on technology and an individual lecture programme at the ETFN

Agentek is new distribution partner in Israel

04/24/2023 | Inspection Solutions

Agentek is new distribution partner for high-quality inspection solutions in Israel

VECS - VEHICLE ELECTRONICS & CONNECTED SERVICES 2023

04/21/2023 | Automotive Test Solutions

automotive test technologies at VECS 2023

SCANFLEX® TIC Module

04/13/2023 | Embedded JTAG Solutions

New SCANFLEX TIC module for programming of microcontrollers

SMTconnect 2023

03/27/2023 | Embedded JTAG Solutions

Latest test and inspection solutions at SMTconnect

current version 4.9.0. of the SYSTEM CASCON system software for automatic test programme generation

03/20/2023 | Embedded JTAG Solutions

SYSTEM CASCON 4.9.0 increases speed, flexibility and user-friendliness

6222 Video Dragon

02/14/2023 | Automotive Test Solutions

Video Dragon - Universal test technology for automotive control units with video interfaces

PILOT AOI version 7

02/10/2023 | Inspection Solutions

PILOT AOI version 7 offers more flexibility and automation

embedded world 2023

02/10/2023 | Embedded JTAG Solutions

test technology highlights from boundary scan to automotive test at embedded world

technology day EMIL

01/27/2023 | Embedded JTAG Solutions

EMIL Technology Day brings Electronic Manufacturing & Inspection Solutions to life

Penang, Malaysia

01/19/2023 | Embedded JTAG Solutions

GOEPEL electronic opens branch office in Malaysia

OiTec supports the GÖPEL application team

12/20/2022 | Embedded JTAG Solutions

OiTec became a New GATE Partner for GOEPEL electronic

IPC CFX

12/20/2022 | Inspection Solutions

Inspection solutions with IPC CFX standard

New SFX II range of JTAG/Boundary Scan controllers

11/22/2022 | Embedded JTAG Solutions

SCANFLEX II controller sets new standards

electronica 2022

11/11/2022 | Embedded JTAG Solutions

Latest test and inspection solutions at electronica

FlashFOX®

11/10/2022 | Embedded JTAG Solutions

New generation Flash Programmer for production

X-BUS Emulation

06/20/2022 | Embedded JTAG Solutions

Emulation of serial bus interfaces for flexible testing and programming

Automotive Testing Expo

06/09/2022 | Company

Visit GÖPEL electronic at the Automotive Testing Expo Europe in Stuttgart

GÖPEL electronic at the embedded world

06/08/2022 | Company

New technologies at embedded world 2022 in Nuremberg

Infotainment test cell

05/25/2022 | Automotive Test Solutions

New infotainment test system determines haptic key figures

JTAG/Boundary Scan and Embedded JTAG Solutions for TRI TR5001 SII Series

05/24/2022 | Embedded JTAG Solutions

TRI test systems now can be extended with Embedded JTAG solutions

AI Advisor

05/09/2022 | Inspection Solutions

New AI-based assistance function for verification and repair stations

THT Line · 3D

05/09/2022 | Inspection Solutions

Double-sided 3D inspection of THT assemblies

PicoTAP ATE

05/06/2022 | Embedded JTAG Solutions

Ultra-compact JTAG/Boundary Scan Controller for Lab and Production

Vario Line · 3D

05/06/2022 | Inspection Solutions

New 3D AOI generation reduces false rejects

Battery Management System (BMS)

04/06/2022

Battery management system (BMS) for e-cars put to the test

Intelligent test and inspection solutions

03/18/2022 | Company

Intelligent inspection and test solutions at SMTconnect

PCB Digital Twin

03/03/2022 | Inspection Solutions

Programme optimization by using a Digital Twin of a PCB

Intelligent Reliability 4.0

02/08/2022 | Company

GÖPEL electronic supports joint project for research into reliable electronics

GÖPEL electronic products tested

12/21/2021 | Embedded JTAG Solutions

Security gap log4j - GÖPEL electronic products tested

SYSTEM CASCON

11/19/2021 | Embedded JTAG Solutions

New SYSTEM CASCON software version with numerous features

SFX II PXIe C4/FXT

11/18/2021 | Embedded JTAG Solutions

SCANFLEX II controller now also available as PXIe

JEDOS II

11/17/2021 | Embedded JTAG Solutions

New JEDOS generation for SoC function test

CION-LX Module/FXT32

11/16/2021 | Embedded JTAG Solutions

Integrated test of digital and analogue I/O signals

X-ray software PILOT AXI

11/04/2021 | Inspection Solutions

New offline programming software for AXI systems

Seica Integration

11/01/2021 | Embedded JTAG Solutions

MultiPanel and VIVA 64 Bit Support for Seica Integration

GÖPEL electronic presenting new solutions

10/11/2021 | Company

productronica 2021: Smart Test and Inspection Solutions

fleX Line · 3D

09/30/2021 | Inspection Solutions

New inline X-ray system for highly flexible and precise inspection

05/11/2021 | Inspection Solutions

Shorter AOI test time with new PILOT AOI version

intelliFLOW Multi-chamber Principle

04/12/2021 | Inspection Solutions

Intelligent PCB Transport for X-ray Inspection System

PILOT AOI 6.5

03/09/2021 | Inspection Solutions

New AOI software version with enhanced 3D capabilities

SYSTEM CASCON Integration in SPEA4020

03/09/2021 | Integration

Embedded JTAG Solutions for SPEA4020

newly developed compact 3D measuring head

03/03/2021 | Inspection Solutions

New system for 3D selective solder joint inspection

VarioTAP

02/24/2021 | Embedded JTAG Solutions

Emulation technology VarioTAP available for two more STMicroelectronics processors

BARCUDA VP230

01/22/2021 | Embedded JTAG Solutions

New test and programming solution for electronics manufacturing

Test Convention connect

01/05/2021 | Events

GÖPEL electronic stages test technology event in digital guise

PILOT Verify Training Mode

12/16/2020 | Inspection Solutions

Training sessions for production staff

Human-Machine AXI Communication

12/11/2020 | Inspection Solutions

Expanded human-machine-communication for X-ray system

SFX II BLADE 8 RMx1/2

12/10/2020 | Embedded JTAG Solutions

New JTAG/Boundary Scan controller for large-scale testing and programming

Upgrading 2D AOI to 3D AOI

12/01/2020 | Inspection Solutions

GÖPEL electronic offers upgrade from 2D to 3D AOI system

Secure On-Board Communication with Series 61 / 62

10/27/2020 | Automotive Test Solutions

Automotive Cyber Security: Automotive communication controllers support SecOC

AXI System Production in Jena

10/21/2020 | Inspection Solutions

GÖPEL electronic becomes strategic X-ray system supplier for German automotive supplier

JTAG/Boundary Scan Integration in Takaya 1600FD

10/20/2020 | Embedded JTAG Solutions

JTAG/Boundary Scan integration into Takaya 1600FD with multiprobe option

3D volume image of a void

09/01/2020 | Inspection Solutions

CTview - 3D volume detection for easier analysis on AXI system

PILOT Supervisor

08/11/2020 | Inspection Solutions

Uniform exchange format in the production process

SCANBOOSTER II Designer Studio

07/17/2020 | Embedded JTAG Solutions

New cost-effective entry-level Embedded JTAG technology bundle

3D AOI Image

06/15/2020 | Inspection Solutions

GÖPEL electronic presents a series of affordable 3D AOI systems

ITMC USB3 Gen1 Host Module

06/11/2020 | Embedded JTAG Solutions

Functional testing of USB3 interfaces

VarioTAP for Marvell 88Q5050

05/27/2020 | Embedded JTAG Solutions

Test option for Marvell Automotive Ethernet Switches

RAPIDO

04/30/2020 | Embedded JTAG Solutions

RAPIDO with new Features

Plug-on Modules for Interface Testing of CAN-FD and Ethernet

03/12/2020 | Embedded JTAG Solutions

New Modules for Testing CAN-FD and Ethernet Interfaces

Monitoring the electronics manufacturing process with PULSE

03/03/2020 | Inspection Solutions

GÖPEL electronic joins PULSE Community by ASYS

Emulation Based Interconnection Test EmuBIT

02/24/2020 | Embedded JTAG Solutions

Automatic Interconnection Test of Non-Boundary-Scan Capable Microcontrollers

Entry Level JTAG/Boundary Scan Controller

02/24/2020 | Embedded JTAG Solutions

New cost-efficient JTAG/Boundary scan controller for beginners

GÖPEL electronic Company Building in Jena

01/27/2020 | Company

GÖPEL electronic ends financial year with historic record sales

embedded world 2020

01/23/2020 | Company

Automotive Test, Embedded Test and Programming at the embedded world 2020

New VarioTAP Models

11/18/2019 | Embedded JTAG Solutions

New test and programming options for processors from Texas Instruments, Renesas and Microchip

Takaya Panel Programming

11/18/2019 | Embedded JTAG Solutions

Multi-panel programming in Takaya Flying-Prober with integration solution

SFX II TIC120/LX expansion Module

11/18/2019 | Embedded JTAG Solutions

New TIC expansion module for SCANFLEX II controller family

JTAG/Boundary Scan Integration in SEICA compact

11/18/2019 | Embedded JTAG Solutions

Embedded JTAG Solutions combined with Seica Compact ICT

MultiEyeS plus

11/18/2019 | Inspection Solutions

AOI module with artificial intelligence for mounting processes and THT assembly

productronica 2019

10/23/2019 | Company

GÖPEL electronic at the productronica 2019

3D THT Solder Joints

10/16/2019 | Inspection Solutions

3D inspection of THT solder joints in the manufacturing process

SYSTEM CASCON Test Coverage Analyzer

10/14/2019 | Embedded JTAG Solutions

New TCA Increases Test Coverage

VarioTAP

09/30/2019 | Embedded JTAG Solutions

New VarioTAP Models for Texas Instruments and NXP Processors

MES Connection with PILOT Connect

09/05/2019 | Inspection Solutions

Inspection system delivery with guaranteed MES connection

SCANFLEX II TIC01 - TAP Interface Card 01

08/20/2019 | Embedded JTAG Solutions

New SCANFLEX II TAP Interface Card (TIC) for full 5V compatibility

Sample Point System for CAN/CAN-FD

08/06/2019 | Automotive Test Solutions

Sample Point System for CAN/CAN-FD

3D AOI Systems with SPI Function

07/24/2019 | Inspection Solutions

Solder Paste and Placement Inspection with 3D AOI systems

Mark Daglish - New Technical Sales Engineer

07/08/2019 | Company

GOEPEL electronic strengthens Service and Sales Forces in the UK and Ireland

VarioTAP

06/25/2019 | Embedded JTAG Solutions

Using ADAS SoC as a Test and Programming Instrument

Scalable Test Environment

05/20/2019 | Automotive Test Solutions

New, compact test system for automotive ECUs

PCIe 6222 Video Dragon - Frame Grabber and Generator

05/17/2019 | Automotive Test Solutions

Frame grabber and generator for quality assurance of ADAS components

VarioTAP

05/03/2019 | Embedded JTAG Solutions

Emulation technology VarioTAP available for two more Texas Instruments processors

MultiAngle Detector 3

05/03/2019 | Inspection Solutions

Update for X-ray system: X Line · 3D gets new 3D detector

JTAG/Boundary Scan for SPEA4080

05/03/2019 | Embedded JTAG Solutions

Embedded JTAG Solutions for SPEA4080

SYSTEM CASCON

05/02/2019 | Embedded JTAG Solutions

Subsequent fault diagnosis for SYSTEM CASCON

Interface Tester SFX II ITM/8

04/01/2019 | Embedded JTAG Solutions

Interface tester for most modern bus interfaces

JTAG/Boundary Scan for Teradyne ICT

03/27/2019 | Integration

JTAG/Boundary Scan for Spectrum ICT von Teradyne

VarioTAP

03/12/2019 | Embedded JTAG Solutions

Using Renesas and NXP processors as tools for testing and programming

GÖPEL electronic wins embedded award 2019

03/01/2019 | Embedded JTAG Solutions

Award-winning Test Instruments from the Cloud: Embedded Award for ChipVORX Synthetic Instruments

SYSTEM CASCON 4.6.9

02/25/2019 | Embedded JTAG Solutions

New SYSTEM CASCON Version with test instruments from the cloud

GÖPEL electronic at the embedded world 2019

02/12/2019 | Trade Show

Embedded World 2019: Automotive Test Solutions & Embedded JTAG Solutions

basicCAN6153.STM

12/06/2018 | Automotive Test Solutions

New Functions for CAN FD Stress and Trigger Module

Predictive Maintenance for AXI System

11/09/2018 | Inspection Solutions

Predictive Maintenance for Inline AXI System

SCANFLEX II BLADE 4

11/08/2018 | Embedded JTAG Solutions

JTAG/Boundary Scan Controller for Industrial Production Use

3D AOI

11/05/2018 | Inspection Solutions

New 3D camera module for stand-alone AOI system Basic Line

Testing and programming in electronics production

11/05/2018 | Embedded JTAG Solutions

JULIET Test System Enters Third Generation

Automotive Ethernet Media Converter

10/26/2018 | Automotive Test Solutions

EasyCON: New Media Converter for Automotive Ethernet

VarioTAP for Renesas RH850/F1K

10/24/2018 | Embedded JTAG Solutions

VarioTAP for Renesas RH850/F1K

GOEPEL electronic at the electronica 2018

10/04/2018 | Embedded JTAG Solutions

New developments at electronica 2018

Analogue Measurement with SCANFLEX II

09/28/2018 | Embedded JTAG Solutions

Extension module for SCANFLEX II enables analog measurements

Intel Arria 10 Emulation

08/30/2018 | Embedded JTAG Solutions

JTAG Enabled Processor Emulation for Intel Arria 10 SoC

Holger Göpel and Alice Göpel

08/13/2018 | Company

New Managing Director at GOEPEL electronic

Embedded JTAG Solutions Controller SCANFLEX II Cube with WLAN Interface

07/16/2018 | Embedded JTAG Solutions

WLAN connection for Boundary Scan Controller “SCANFLEX II CUBE”

PILOT Inspect Software on a Mobile Device

07/09/2018 | Inspection Solutions

AXI machine control software now available in Chinese

Embedded JTAG Solutions System Software

06/19/2018 | Embedded JTAG Solutions

New version of SYSTEM CASCON increases test throughput

Embedded JTAG Solutions Desktop Test System

06/01/2018 | Embedded JTAG Solutions

New Functions for JULIET Production Tester

Process Fault in Sinter Paste Printing

06/01/2018 | Inspection Solutions

Improved inspection of solder pastes, sinter pastes and DCB substrates

THT Line

06/01/2018 | Inspection Solutions

Fast and reliable inspection of THT assemblies with angled-view and automated AOI test program generation

Test System for Car Seat Production

06/01/2018 | Automotive Test Solutions

New test system for high-speed contactless 3D testing of car seats

SFX/VPC-AMC128 (Analog Measurement Card)

05/28/2018 | Embedded JTAG Solutions

Measuring a large number of analog voltages quickly and easily

Test System for Car Keys

05/15/2018 | Automotive Test Solutions

Haptic Test for Car Keys

New Series 62 Communication Controller

05/02/2018 | Automotive Test Solutions

Next-Generation Communication Controller supporting up to 16 Bus Interfaces

Hall 4A, Booth 222

04/13/2018 | Company

A Fresh Breeze for Test and Inspection Solutions at the 2018 SMT/Hybrid/Packaging Show

Altera Cyclone V FPGA

04/03/2018 | Embedded JTAG Solutions

Protection of Altera Cyclone V FPGAs Against Potential Attacks

CPE Systems NZ Ltd

03/19/2018 | GATE

GOEPEL electronic Extends Global Presence of Embedded JTAG Solutions to New Zealand

R-Car M3 SoCs (System-on-Chip) by Renesas

02/26/2018 | Embedded JTAG Solutions

VarioTAP emulation test expanded to include Automotive-SoC R-Car M3 by Renesas

Digitaltest Condor MTS505 Flying Probe Tester

02/19/2018 | Integration

Combined Flying Probe Test and JTAG/Boundary Scan for Multiple PCBs

GOEPEL electronic at the embedded world 2018

02/14/2018 | Trade Show

Test Solutions for Electronics and Automotive Applications at embedded world 2018

basicCON 4045 Stand-Alone Ethernet Stress Module

02/12/2018 | Automotive Test Solutions

Stress Module for Automotive Ethernet Applications

GOEPEL electronic Company Buildings

01/31/2018 | PR

GOEPEL electronic ends 2017 with another record breaking year

Test and Validation of Cypress PSoC 4

01/04/2018 | Embedded JTAG Solutions

Simplified Testing and Programming of Cypress PSoC 4 Controllers with VarioTAP technology

Sparrow MTS30 ICT

11/30/2017 | Integration

Embedded JTAG Solutions Integration for Sparrow MTS30 ICT by Digitaltest

CION-LX Module DIMM288-4

11/09/2017 | Embedded JTAG Solutions

New Module for Boundary Scan Testing of DDR4 DIMM Sockets for High Test Coverage of Mainboards

Series 61

11/09/2017 | Programming

Flash In-System Programming (ISP) via the Automotive Bus

Flying Probe Test System 4050 from SPEA

11/08/2017 | Integration

Increased Test Coverage for SPEA 4050 Flying Probe System

3D AOI Test Program

11/08/2017 | Inspection Solutions

Fully Automated Generation and Optimization of Test Programs with 3D AOI

3D X-ray image

11/06/2017 | Inspection Solutions

New Detector for Flexible Automated X-ray Inspection

AURIX TC399 in LFBGA package

11/03/2017 | Embedded JTAG Solutions

Expands Test and Emulation Expanded on Microcontrollers for Automated and Electrified Vehicles

productronica innovation award 2017

10/25/2017 | Inspection Solutions

PILOT Supervisor is nominated for the productronica innovation award 2017

GOEPEL electronic productronica 2017

10/09/2017 | Trade Show

productronica 2017: Flexible And Time Saving Test and Inspection Solutions

TIC022-MUX/SR

09/28/2017 | Embedded JTAG Solutions

New Embedded Test and Programming Interface

Series 61 PXI Controller PXI 6153

09/18/2017 | Automotive Test Solutions

Series 61 Communication Controller Now Compatible with Linux

Electronics Design Show in Coventry (UK)

08/16/2017 | Trade Show

Embedded JTAG Solutions at Electronics Design Show

Frédéric Preteseille in front of the X Line · 3D at Magneti Marelli in Châtellerault Cedex, France

08/15/2017 | Inspection Solutions

Magneti Marelli Decides on X-ray Inspection System from GOEPEL electronic

Cypress EZ-USB FX 3 USB 3.0 Controller (Source: Cypress)

07/18/2017 | Embedded JTAG Solutions

Cost- and Time-Efficient Programming of Cypress EZ-USB FX3 Controllers

Clean room capability for the inspection systems of the series Vario Line · 3D, SPI Line · 3D and Advanced Line

06/30/2017 | Inspection Solutions

Clean Room Compatible AOI and SPI Systems

New System for Endurance Test CFM15

06/22/2017 | Automotive Test Solutions

New System for Endurance Test of Ventilator Motors and HVAC Systems

Embedded JTAG Solutions Software Suite SYSTEM CASCON

06/13/2017 | Embedded JTAG Solutions

Security and Protection for Xilinx Ultrascale FPGAs

SCANFLEX II Cube

05/31/2017 | Embedded JTAG Solutions

SCANFLEX II CUBE: New Generation JTAG/Boundary Scan Controller

Architecture of the MAX 10 FPGAs (Source: Intel)

05/18/2017 | Embedded JTAG Solutions

ChipVORX® technology for Chip Embedded Instruments extended on Intel® MAX® 10 FPGAs

Teradyne TestStation TSi-052 with Embedded JTAG Solutions integration

05/17/2017 | Integration

Integration of Embedded JTAG Solutions in Teradyne In-Circuit Platform

Start page of the PILOT Inspect software

05/17/2017 | Inspection Solutions

Mobile and Unified Control of Inspection Systems with PILOT Inspect

X Line · 3D Series 300

05/17/2017 | Inspection Solutions

Extensions in the inline X-ray system for shorter cycle times and faster PCB handling

Employees of the Indian branch with Managing Director Jörg Schneider and Head of the branch Sandeep Reddy Cherukupalli

04/25/2017 | Contact

Indian Subsidiary of GOEPEL electronic celebrates anniversary

3V ELECTRONICS Ltd.

04/24/2017 | Support

GOEPEL electronic announces new distribution partner for Bulgaria

Vario Line · 3D

04/24/2017 | Trade Show

3D Solder Joint Measurement and Centralized Verification of Inspection Results at the SMT Hybrid Packaging 2017

X Line · 3D

03/24/2017 | Inspection Solutions

Increased Inspection Speed and new Soft Stop Option for Inline X-ray System

ZYNQ UltraScale+

03/22/2017 | Embedded JTAG Solutions

Debugging and testing the Zynq UltraScale+ Multi-processor SoCs by Xilinx

VarioTAP

03/20/2017 | Embedded JTAG Solutions

VarioTAP emulation test expanded to include Automotive-SoC R-Car H3 by Renesas

SPEA 4060 Flying Probe Tester

03/16/2017 | Integration

Support for embedded JTAG solutions for analogue pin cards in the SPEA4060 flying probe tester

Intel® Arria 10 SoC

03/15/2017 | Embedded JTAG Solutions

Combined test technologies for Intel® Arria 10 SoCs

Test and programming solutions for embedded electronics of the future

03/14/2017 | Embedded JTAG Solutions

Test and programming solutions for embedded electronics of the future

GCaT Cable tester for High-Speed link cables

02/24/2017 | Company

A New Standard in Powerful Embedded Test and Programming

Stress and trigger module for CAN FD BasicCON 4055

02/15/2017 | Automotive Test Solutions

The world's first stress and trigger module for CAN FD

02/07/2017 | Company

GÖPEL electronic achieves record sales in anniversary year

Enics Group became a new GATE partner

01/16/2017 | Embedded JTAG Solutions

Enics Group Became a New GATE Partner for GOEPEL electronic

01/04/2017 | Company

GOEPEL electronic Initiates Transition to The Next Generation

i.MX6 family from NXP

12/07/2016 | Embedded JTAG Solutions

Test and Diagnostics Operating System JEDOS now available for i.MX6 Processors from NXP

ChipVORX Module with USB 3.0 adapter from INGUN

11/10/2016 | Embedded JTAG Solutions

INGUN and GOEPEL electronic cooperate for full testing of high-speed interfaces "Made in Germany"

GCaT Gigabit Cable Tester

11/09/2016 | Embedded JTAG Solutions

Testing the transmission quality of high-speed link cables

11/08/2016 | Inspection Solutions

Automatic Solder Bead Detection Prevents Sudden Circuit Shorts

AOI and AXI fault images overview

11/07/2016 | Inspection Solutions

Central Verification of Inspection Results from Several Systems

Boris Opfer (left, SYSTECH Europe) and Alexander Beck (right, GÖPEL electronic) implement the integration of the Boundary Scan in the Flying Probe Test system APT-1400F

11/07/2016 | Integration

Combined test methods: JTAG/Boundary Scan available for Flying Prober Testers from TAKAYA

SPEA 4060 Flying Probe Tester

10/05/2016 | Integration

Improved Production Throughput in SPEA Flying Probe Systems through Extension of Boundary Scan Integration

High volume automotive assemblies with THT, BGA, QFN and DPAK components

09/21/2016 | Inspection Solutions

IPC Compliant THT Solder Joint Inspection of Automotive Connectors

electronica 2016

09/21/2016 | Embedded JTAG Solutions

3D AOI redefined: GOEPEL electronic presents new 2D/3D camera module and other test and inspection solutions at electronica 2016

09/07/2016 | Bit Error Rate Test (BERT)

Extension of ChipVORX Technology for Chip Embedded Instruments on Altera Arria V SoC Series

Processor emulation VarioTAP

09/02/2016 | Embedded JTAG Solutions

GOEPEL electronic expands Test and Emulation on Bluetooth SoC Controller of Nordic Semiconductor

Multicam Line

09/01/2016 | Inspection Solutions

Frictionless AOI inline system in the narrowest of spaces

Show more news No further news available

Events

04/16/2024 19:00 - 20:00 UTC
|
Inspection Solutions
|
Web Seminar

From prototype to volume production

04/23/ - 04/25/2024 09:00 - 17:00 UTC
|
Inspection Solutions
|
Trade Show

InnoElectro

1146 Budapest, Hungary

05/14/ - 05/15/2024 10:00 - 17:00 UTC
|
Automotive Test Solutions
|
Trade Show

VECS

412 51 Gothenburg, Sweden

11/26/ - 11/28/2024 09:00 - 16:30 UTC
|
Embedded JTAG Solutions
|
Seminar

Embedded JTAG Solutions Seminar for Advanced Users

Do you need help?

Contact us!

GÖPEL electronic GmbH

+49-3641-6896-0 Phone

info@goepel.com

english