Skip to main content

I/O Modules

The third major component in a SCANFLEX system is the optional I/O Module. These I/O modules are controlled independently from any other resources in the system through the SFX/LS interface. If the number of required SCANFLEX I/O Modules is very small (only 1 to 2 modules needed) the modules can be plugged directly onto the TAP-Transceiver, eliminating any additional cabling.

Alternatively, I/O modules can be put into SCANFLEX Carriers, connected to the Controller or the TAP Transceiver through a SFX/LS cable (0.5 m/1.5f t, 1 m/3 ft, 3 m/10 ft, or 5 m/15 ft).

SCANFLEX I/O Modules are used to extend the performance and capabilities of the Boundary Scan system with additional test instruments and programming resources, highly modular and scalable to match any specific test/ISP application. Custom specific modifications of standard modules and development of custom modules are offered through GÖPEL electronic’s engineering services.

Steffen Kamprad - Sales Manager
Mr Steffen Kamprad
+49-3641-6896-714 Phone
I/O Modul SFX-5296
I/O Modul SFX-5296
I/O Module SFX-5704 with TAP Transceiver
I/O Module SFX-5704 plugged on a TAP4 Transceiver