PXI Modules - GOEPEL electronics

PXI Module

In the recent years, PXI has established its position in the test and measurement industry, especially with such features as high data transfer rates, small rugged industrial footprint, open standard and multiple vendors. PXI (PCI eXtensions for Instrumentation) is an open industry standard for modular measurement and automation systems (www.pxisa.org). Based on and compliant to Compact-PCI, PXI combines the PCI-specification with new instrumentation specific features, taking advantage of the high performance of state-of-the-art PC-systems and their low cost. Based on the high-speed PCI bus, data rates up to 132MB/s are possible.

Typically PXI has been used for test and measurement but there has been a growing acceptance of new applications that PXI can be used for, including Boundary Scan/JTAG. GÖPEL electronic now makes it easy to integrate Boundary Scan into PXI test and measurement systems.

With innovative Boundary Scan Power Supplies, Digital I/O, Differential I/O and Mixed Signal I/O extension modules, GÖPEL electronic offers a complete range of PXI products for the integration in respective ATE systems.

PXI 5120 PXI Power Supply
	operation in 3.3 V / 5 V PXI and cPCI racks two independent and galvanically isolated voltage outputs programmable current limit 0…10 A setting of output voltage and current limit via the host interface recording of output voltage, output current and overcurrent flag use of trigger signals for the event control interconnection of the C-bus via Trigger bus, Star trigger, Local bus, as well as external U/I read back and recording functions (1,024 samples) thermal and overload protection IVI / VISA / LabVIEW s/w drivers variants: 2 V version 0.5…2 V 3 V version 1.2…3.3 V 5 V version 2.5…5 V 12 V version 5…12 V 24 V version 11…24 V 48 V version 23…48

PXI 5296 Digital I/O

PXI 5296 Digital I/O

BScan Digital I/O Module with 96 channels, based on GÖPEL electronic’s CION™ component. 3U/1Slot instrument, groups of 32 channels each are voltage programmable between 1.8 and 5 V. Each channel can independently be configured as Input, Output, Bi-directional, Tri-State (Hot-Swap) and supports the Unstress feature.

operation in PXI^TM and cPCI^TM racks
96 test channels
all channels can be interconnected in HOT-SWAP mode – safe contacting is possible without PXI system being switched off
96 test channels are subdivided into three groups with 32 channels each
each group is programmable from 1.8 V to 5 V
each channel is switchable as input, output or bi-directional pin, and 5 V tolerant
driver current per channel: ±24 mA @ 5 V
Unstress feature
preinstalled 50 pin IDC cables (3 X 1m)

PXI 5350 PXI Differential I/O
	1slot module with 3U 50 bi-directional differential I/O channels the PXI increment supports the following differential standards: LVDS (24 inputs, 24 outputs) BLVDS (50 bi-directional differential lines) LVPECL (24 inputs, 24 outputs) depending on the I/O-Standard each channel is input, output or bi-directional driver power per test channel is dependent on the selected I/O standard preinstalled 50 pin IDC cables (3 X 1m) triggering of the native PXI interface – higher vector frequenz and data throughput special features: scalable scheduling support of PXI-triggerbus

PXI 5396 Digital I/O

PXI 5396

Boundary Scan Digital I/O Module with 96 channels, based on GÖPEL electronic’s CION™ component. 3U/1Slot instrument, six groups of 16 channels each are voltage programmable between 1.8 and 4,5 V. Each channel can independently be configured as Input, Output, Bi-directional, Tri-State (Hot-Swap) and supports the Unstress feature. I/O signals are available via a Paddle Card.

operation in PXI^TM and cPCI^TM racks
96 test channels
all channels can be interconnected in HOT-SWAP mode – safe contacting is possible without PXI system being switched off
96 test channels are subdivided into six groups with 16 channels each
each group is programmable from 1.8 V to 4,5 V
each channel is switchable as input, output or bi-directional pin
Unstress feature
combination of structural Boundary Scan tests and functional tests with up to 100 MHz clock rate
VarioCore^® technology integrated

PXI 52192 Digital I/O
	operation in PXI^TMand cPCI^TMracks 192 test channels all channels can be interconnected in HOT-SWAP mode – safe contacting is possible without PXI system being switched off the 192 test channels are subdivided into six groups with 32 channels each each group is programmable from 1.8 V to 5 V each channel is switchable as input, output or bi-directional pin, and is 5V tolerant driver current per channel: ±24 mA @ 5 V Unstress feature Preinstalled 50 pin cables (6 X 1m)

You will find further PXI Controller under SCANFLEX^® section.

The latest PXI specification is available from the PXI Systems Alliance website
[www.pxisa.org].
GÖPEL electronic has been one of the first vendors to launch PXI-based products. The company is a member of the PXI Systems Alliance.