Sprache wählen: 
 Search | Home 
     

     
     About Boundary Scan 
     Software 
     Hardware
       SCANFLEX 
       Scan Booster 
       CION Modules 
       PXI - Modules 
       Accessories 
       Integration in ATE Systems 
       Boundary Scan Coach 
       Download 
       Links 
       References 
       Contact 

       

       

       
      		Home > JTAG/Boundary Scan > Hardware > PXI - Modules


      PXI Module

      In the recent years, PXI has established its position in the test and measurement industry, especially with such features as high data transfer rates, small rugged industrial footprint, open standard and multiple vendors. PXI (PCI eXtensions for Instrumentation) is an open industry standard for modular measurement and automation systems (www.pxisa.org). Based on and compliant to Compact-PCI, PXI combines the PCI-specification with new instrumentation specific features, taking advantage of the high performance of state-of-the-art PC-systems and their low cost. Based on the high-speed PCI bus, data rates up to 132MB/s are possible.

      Typically PXI has been used for test and measurement but there has been a growing acceptance of new applications that PXI can be used for, including Boundary Scan/JTAG. GÖPEL electronic now makes it easy to integrate Boundary Scan into PXI test and measurement systems.

      With innovative Boundary Scan Power Supplies, Digital I/O, Differential I/O and Mixed Signal I/O extension modules, GÖPEL electronic offers a complete range of PXI products for the integration in respective ATE systems.

      PXI 5702 Boundary Scan Mixed Signal I/O

      PXI 5702 JTAG/Boundary Scan Mixed Signal I/O

      • two driver and sensor channels independent of each other
      • voltage range for digital control between
        -3 V...+9 V
      • analogue voltage range for discrete voltage value output
        -10 V...+10 V
      • maximum output current static ±200 mA and dynamic ±380 mA
      • back driving function dependent on the test bus states
      • programmable current limit
      • can be synchronised with the Boundary Scan controllers PXI 1149.1 A/B
      • optimised for use with the Boundary Scan Prober or a manually handled probe

      To top

      PXI 5120 PXI Power Supply

      PXI 5120 PXI Power Supply

      • operation in 3.3 V / 5 V PXI and cPCI racks
      • two independent and galvanically isolated voltage outputs
      • programmable current limit 0…10 A
      • setting of output voltage and current limit via the host interface
      • recording of output voltage, output current and overcurrent flag
      • use of trigger signals for the event control
      • interconnection of the C-bus via Trigger bus, Star trigger, Local bus, as well as external
      • U/I read back and recording functions (1,024 samples)
      • thermal and overload protection
      • IVI / VISA / LabVIEW s/w drivers
      • variants:
        • 2 V version 0.5…2 V
        • 3 V version 1.2…3.3 V
        • 5 V version 2.5…5 V
        • 12 V version 5…12 V
        • 24 V version 11…24 V
        • 48 V version 23…48

      To top

      PXI 5350 PXI Differential I/O

      PXI 5350 PXI Differential I/O

      • 1slot module with 3U
      • 50 bi-directional differential I/O channels
      • the PXI increment supports the following differential standards:
        • LVDS (24 inputs, 24 outputs)
        • BLVDS (50 bi-directional differential lines)
        • LVPECL (24 inputs, 24 outputs)
      • depending on the I/O-Standard each channel is input, output or bi-directional
      • driver power per test channel is dependent on the selected I/O standard
      • preinstalled 50 pin IDC cables (3 X 1m)
      • triggering of the native PXI interface – higher vector frequenz and data throughput
      • special features:
        • scalable scheduling
        • support of PXI-triggerbus

      To top

      PXI 5296 Digital I/O

      PXI 5296 Digital I/O

      BScan Digital I/O Module with 96 channels, based on GÖPEL electronic’s CION™ component. 3U/1Slot instrument, groups of 32 channels each are voltage programmable between 1.8 and 5 V. Each channel can independently be configured as Input, Output, Bi-directional, Tri-State (Hot-Swap) and supports the Unstress feature.

      • operation in PXITM and cPCITM racks
      • 96 test channels
      • all channels can be interconnected in HOT-SWAP mode – safe contacting is possible without PXI system being switched off
      • 96 test channels are subdivided into three groups with 32 channels each
      • each group is programmable from 1.8 V to 5 V
      • each channel is switchable as input, output or bi-directional pin, and 5 V tolerant
      • driver current per channel: ±24 mA @ 5 V
      • Unstress feature
      • preinstalled 50 pin IDC cables (3 X 1m)

      To top

      PXI 52192 Digital I/O

      PXI 52192 Digital I/O

      • operation in PXITM and cPCITM racks
      • 192 test channels
      • all channels can be interconnected in HOT-SWAP mode – safe contacting is possible without PXI system being switched off
      • the 192 test channels are subdivided into six groups with 32 channels each
      • each group is programmable from 1.8 V to 5 V
      • each channel is switchable as input, output or bi-directional pin, and is 5V tolerant
      • driver current per channel: ±24 mA @ 5 V
      • Unstress feature
      • Preinstalled 50 pin cables (6 X 1m)

      To top

      SCANFLEX® Controller for PXI Bus

      JTAG/Boundary Scan Controller for PXI Bus

      General product information

      • Compliant with PCI standard specification revision 2.2
      • Provides Local Bus Interface and supports entire PXI Trigger Bus
      • Compliant with IEEE1149.1, IEEE1149.4, IEEE1149.6, IEEE1532, JESD71 (STAPL), SVF (Serial Vector Format)
      • Can be combined with all available SCANFLEX® components (SCANFLEX® TAP Transceivers, SCANFLEX® I/O Modules)
      • Full software support by JTAG/Boundary Scan development environment SYSTEM CASCON™
      • Guaranteed support of future advancements due to highly flexible, in-field re-programmable system hardware
      • Leading system architecture, based on specifically developed technologies (SPACE™, ADYCS™, HYSCAN™, FASTSCALE™)
      • Test programs and ISP scripts are cross compatible with all Boundary Scan controllers from GÖPEL electronic
      • Applicable for Standard Boundary Scan test, in-system programming (ISP) and in-system configuration (ISC)
      • Supports Extended Boundary Scan operations in combination with various other test and programming methodologies
      • Simple integration in PXI Express systems based on preconfigured plug-ins (NI LabView, NI LabWindows, and NI TestStand)
      • Universal solutions for laboratory and production
      More information about:

      SFX/PXI1149-A – Scanflex Controller for medium performance
      SFX/PXI1149-B – Scanflex Controller for high performance
      SFX/PXI1149-c – Scanflex Controller for ultra high performance

       

      If you are interested in detailed information please [contact] us.

      [Here you can download more detailed information about all PXI products by GÖPEL electronic]

      Click [here] for further information about the PXI technology.


      The latest PXI specification is available from the PXI Systems Alliance website
      [www.pxisa.org]      .
      GÖPEL electronic has been one of the first vendors to launch PXI-based products. The company is a member of the PXI Systems Alliance.

       Login | Search | Sitemap | Privacy Statement | Imprint