basicCAN and USB 3052 have been developed to provide CAN interfaces for the interchange of messages in a CAN network. The CAN module’s goal is that each CAN interface has its own micro controller. Therefore, it is possible to generate real timings at CAN messages. Both modules are built modularly and realize two to four CAN interfaces. To ensure a high flexibility, the transceivers on the board are arranged as SIMM modules. For high speed transceivers there is a terminating resistor of 120 Ohm on the board, which can easily be switched to the CAN signals via a jumper at every time.
basicCAN
USB 3052
|
 |
Highlights:
- USB 2.0 Interface for the connection on PC or laptop
- Up to four independent full-CAN controllers
- CAN protocol conforms to CAN specification 2.0B
- Real time simulation of ECUs by means of "intelligent" CAN interface
- Freely configurable transceiver according to CAN interface (high or low speed)
- Provision of on-board-functions for transport and diagnostic protocols
- Net management functions
- CAN data base is included (dbc file)
- On-board-functions for DDP and BAP
- Acknowledge disconnectible
- All interfaces are galvanically isolated
- basicCAN with box as a standalone tool
- USB 3052 as a plug-in card
Fields of Application:
- CAN applications in the automotive industry
- CAN applications in the process control
- General test and measurement systems
|
|
basicCAN 
