Choose a language
JTAG/Boundary Scan
Home > JTAG/Boundary Scan > Education > Training Accessories

IEEE 1149.1 Training Accessories

IEEE 1149.1 Training Accessories

The introduction of new technologies such as Boundary Scan always requires the gain of necessary knowledge in theory and practice. In addition to the respective [seminars], GOEPEL electronic also provides demonstration boards and kits for autodidactic practical training.

goJTAG Demo Kit

The goJTAG Demo Kit was developed for an easy entry in the technology of Boundary Scan.
The kit consists of the goJTAG software (WINDOWS XP, VISTA 32 bit), PicoTAP controller with USB cable and the goJTAG Demo Board.

The trainer board features the following components:

  • 2 Boundary Scan devices (buffer, PLD)
  • Failure switches
  • Push button
  • Serial Flash
  • RAM
  • LED

goJTAG
Find out more about goJTAG initiative:
www.gojtag.com

 

Enquire for goJTAG Demo Kit

Scan Coach Board

Scan Coach Board
Scan Coach Board

The Scan Coach board has been designed especially for beginners and shows how to overcome typical traps during JTAG/Boundary Scan test and programming development.

The board features following components:

  • 2 JTAG/Boundary Scan devices
  • FLASH
  • SDRAM
  • buffers
  • simple logic
  • edge connectors
  • LEDs
  • 7 segment display
  • failure switches

Enquire for Scan Coach Board

Scan Coach Kit/USB

Scan Coach Kit/USB
Scan Coach Kit/USB

The Scan Coach Kit/USB is a complete solution to get in-depth knowledge of the JTAG/Boundary Scan technique. It consists of a special version of [CASCON GALAXY®], a [PicoTAP] as JTAG/Boundary Scan controller and the Scan Coach board.

A tutorial is available, describing in detail how to develop different JTAG/Boundary Scan test programs and how to overcome typical problems. Besides, it provides an introduction into the GOEPEL electronic’s JTAG/Boundary Scan test system and information for both JTAG/Boundary Scan circuit design and different programming techniques.

All required components, such as software, JTAG/Boundary Scan controller, Scan Coach board, test bus cable, example programs and descriptions are supplied with the kit. Only a PC with USB interface is required.

The PicoTAP is connected to the UUT by a 10pin flat cable which powers the Scan Coach board.

Highlights Scan Coach Kit/USB
  • Complete test system including PicoTAP controller & Scan Coach board
  • Windows-PC (Windows NT, XP, Vista) based installation
  • Restricted CASCON GALAXY® Advanced Edition
  • Automatic and manual test program generation, test execution and test program verification per debugger
  • Enquire for Scan Coach Kit/USB

    In-System programming (ISP) procedures for FLASH and (C)PLD
  • Fault injection by means of switches or clips
  • Test programs generated with the kit run on other JTAG/Boundary Scan test systems

ESA Coach Board

ESA Coach
ESA Coach

ESA Coach is suitable for both beginners and advanced users in industry, research and education.

It was developed as an evaluation kit for the demonstration of merged Boundary Scan applications and JTAG emulation tests.

The board provides several interfaces like CAN, USB, RS232, I2C, parallel digital I/O and Audio. Furthermore, it enables the practical trial of a multitude of different JTAG/Boundary Scan applications.

  • Flash programming via JTAG emulation or via Boundary Scan
  • Programming of PLD
  • Execution of Boundary Scan test operations, dynamic emulation tests for memories, bus devices, and peripheral interfaces

The following components are integrated on the board:

  • Atmel AT91SAM9G45 MCU (ARM)
  • Xilinx FPGA
  • I2C Flash
  • NOR flash
  • NAND flash
  • SD-DDR2 RAM
  • graphical Display
  • analog potentiometer
  • digital I/O
  • LAN/USB/RS232 Bus Interface
  • Ttemperature sensor
  • failure switchers

Enquire for ESA Coach Board

In addition to the demonstration of the functional principle of the VarioTAP IP, the application of VarioCORE IP for the flexible debug and test instrumentation on the basis of dynamic FPGA reconfiguration can be evaluated.

ESA Coach Kit SFX/PCI

ESA Coach Kit SFX/PCI
ESA Coach Kit SFX/PCI

The ESA Coach Kit SFX/PCI is a complete solution to get in-depth knowledge of the JTAG/Boundary Scan technique. It consists of a special version of [CASCON GALAXY®], a [SFX/PCI1149-A] as JTAG/Boundary Scan controller, a [TAP2] as the TAP Transceiver and the ESA Coach board.

A tutorial is available, describing in detail how to develop different JTAG/Boundary Scan test programs and how to overcome typical problems. Besides, it provides an introduction into the GOEPEL electronic’s JTAG/Boundary Scan test system and information for both JTAG/Boundary Scan circuit design and different programming techniques.

All required components, such as software, JTAG/Boundary Scan controller, TAP Transceiver, ESA Coach board, test bus cable, example programs and descriptions are supplied with the kit. Only a PC with parallel interface is required.

Highlights ESA Coach Kit SFX/PCI
  • Complete test system including SFX/PCI1149-A controller, TAP2 Transceiver & ESA Coach board
  • Windows-PC (Windows NT, XP, Vista) based installation
  • Restricted CASCON GALAXY® Advanced Edition
  • Automatic and manual test program generation, test execution and test program verification per debugger
  • In-System programming (ISP) procedures for FLASH and (C)PLD
  • Enquire for ESA Coach Kit SFX/PCI

    Fault injection by means of switches or clips
  • Emulation test
  • Test programs generated with the kit run on other JTAG/Boundary Scan test systems
GOEPEL electronics Ltd., Unit 1A, The Old Granary, Westwick, Cambridge, CB24 3AR
Phone +44-1223-858298, Fax +44-1223-257800, www.goepel.co.uk