The third major component in a SCANFLEX system is the optional I/O Module. These I/O modules are controlled independently from any other resources in the system through the SFX/LS interface. If the number of required SCANFLEX I/O Modules is very small (only 1 to 2 modules needed) the modules can be plugged directly onto the TAP-Transceiver, eliminating any additional cabling.
Alternatively, I/O modules can be put into SCANFLEX Carriers, connected to the Controller or the TAP Transceiver through a SFX/LS cable (0.5 m/1.5f t, 1 m/3 ft, 3 m/10 ft, or 5 m/15 ft).
SCANFLEX I/O Modules are used to extend the performance and capabilities of the Boundary Scan system with additional test instruments and programming resources, highly modular and scalable to match any specific test/ISP application. Custom specific modifications of standard modules and development of custom modules are offered through GÖPEL electronic’s engineering services.
|SFX-5212||Digital I/O||12||In/Out/Bidir/TS||process voltages up to 30 V|
|SFX-5296||Digital I/O||96||In/Out/Bidir/TS||Protection via CION-ASIC|
|SFX-5350||Differential I/O*||50*||In/Out/Bidir*||Scalable scheduling|
|SFX-5364||Digital I/O||64||In/Out/Bidir/TS||At-Speed test, programmable up to 100 MHz|
|SFX-5704||Mixed-Signal I/O||4||In/Out/Bidir/TS||Voltage measurement per channel, Clipp circuit per channell|
|SFX-6216||Analogue input||16||Fixed Inputs||External triggering, Bipolar inputs|
|SFX-6308||Analogue I/O||8||Fixed Inputs||External triggering, Bipolar inputs|
|SFX-9305||Multi Port Bus||5 Ports||Target bus connection via configured Bus Access Cables (9305-BAC)|
|SFX-9305/R||Multi Port Bus||5 Ports||as SFX-9305 incl. ports can be electrically isolated per relays|
Analogue test bus I/O
|2||AnalogIn/Out/TS||Ramp Generator / Digitizer|
* Default configuration
PXI based I/O Modules
With Boundary Scan Power Supplies, Digital I/O, Differential I/O and Mixed Signal I/O extension modules, GÖPEL electronic offers a complete range of PXI products for the integration in respective ATE systems.
SCANFLEX Carrier - the module carrier
|SCANFLEX Carrier||SFX Slots for
|Functional relays||synchronised via IEEE 1149.1 TAP
|SFX-Carrier5||up to 5||3 Power Relais|
|SFX-Carrier10||up to 10||6/9 Power Relais|
|SFX-Carrier15||up to 15||6/9 Power Relais|
|SFX-Carrier5/C||up to 5||3 Power Relais|
|SFX-Carrier10/C||up to 10||6/9 Power Relais|
|SFX-Carrier15/C||up to 15||6/9 Power Relais|