Control Unit Test via Programmable Communication Controller
Series 61 for the test of control units
Series 61 stands for a powerful communication and test controller generation. The new architecture allows the user to configure the controller individually and flexibly with a wide range of options to satisfy their needs or expand the functionality at a later stage.
All the communication resources of the Series 61 are supported by a powerful PowerPC in connection with an extensive onboard firmware. With this architecture complex and computationally intensive processes can be realized without host PC system.
In addition to the parameterisation of the controller via the standard Windows API from GÖPEL electronic, the user can run and debug own program code directly onboard of the Series 61 module with support of the onboard API.
The PXI card can be used in a CompactPCI™ or PXI™ system and the USB card as a plug-in card in an USB rack.
|PXI 6153 / PCI 6153||PXI 6173 / PCI 6173||PXI 6181 / PCI 6181||PXI 6191 / PCI 6191|
|Port 3||Option 1||Option 1||Option 1||Option 1|
|Port 4||Option 1||Option 1||Option 1||Option 1|
|Port 5||Option 2||Option 2||Option 2||Option 1|
|Port 6||Option 2||Option 2||Option 2||Option 1|
|Analogue and digital-I/O||Option 3 / Option 4||Option 3 / Option 4||Option 3 / Option 4||Option 3 / Option 4|
Option 1: one additional CAN or LIN / K-Line port
Option 2: one additional FlexRay port
Option 3: four additional digital I/O; six analogue I/O
Option 4: four additional digital I/O; four analogue I/O